1911 Internet Thread Archive
These are abridged useful threads on the Colt 1911 pistol. The
threads have been edited to remove non-relevant posts, fix spelling or
typographic errors, et cetera. A link to the original web site or forum
discussion is at the top of each page; please use those URLs to see the
originals.
Further explanation and general rambling: click
here
Link names below may differ from original thread names.
The link category reflects the main discussion, not the name of the thread.
Links prefaced by "***" are edited and viewable. Plain links are "in
progress" and viewable only with a plain text editor.
Online Since: December 05, 2011
Last Updated: July 01, 2013
Page Count: 922
General Information
***1911 firing sequence (forum.m1911.org)
***1911 operation (forum.m1911.org)
***recoil function (forum.m1911.org)
***1911 squib cycle (thehighroad.org)
***link / recoil spring functions (thehighroad.org)
***Kuhnhausen and VIS contact (forum.m1911.org)
***internal ballistics of the .45 Auto (rec.guns)
***more internal ballistics of the .45 Auto (rec.guns)
***Syd's 1911 Notebook (Sep 25, 1999) (The Sight)
***X-ray and operation at firing (thehighroad.org)
***X-Ray of a Colt 1911 Commander (smithwerder.com)
***1911 Alloy? (thehighroad.org)
***1911 linkdown (thehighroad.org)
***Kuhnhausen books (thehighroad.org)
***probable error in Kuhnhausen's Vol II (forum.m1911.org)
***drop test results (10-8 Forums.com)
***dropping an M199A1: accidental discharge (rec.guns)
***Patrick Sweeney books (forums.1911forum.com)
***recoil phase energy budget for a 5" (forum.m1911.org)
Manuals
***FM 23-35 Automatic Pistol, Caliber .45, M1911 and M1911A1 (1940) (ibiblio.org)
***Description of the Automatic Pistol, Caliber .45, Model of 1911 (1912) (web)
***Pistol, Caliber .45, Automatic, M1911A1 Technical Manual 9-1005-211-24 (1964) (web)
***Pistol, Caliber .45, Automatic, M1911A1 Technical Manual TM 91005-211-12P (1968) (web)
***TM 9-1005-206-14P/3 National Match technical manual(1971) (web)
***Theory of Operation, Colt .45 ACP Government Model (sightm1911.com)
***Tiro Para Pistola, Argentine Army operator's manual (Spanish) (20pp) (1960) (forgottenweapons.com)
Blueprints and Drawings
***cutaways and animations (sightm1911.com)
***1911 patents (USPTO)
***blueprints - Rock Island Arsenal, May 1928, 45pp (jpg) (web)
***blueprints - Rock Island Arsenal, May 1928, 45pp (PDF) (web)
***blueprints - frame details, 8pp (jpg) (web)
***blueprints - frame details, 11pp (jpg) (web)
***blueprints - frame details, 3pp (jpg) (web)
***blueprints - large sheets, 8pp (PDF) (web)
***blueprints - M1911-A1 Redux by Rio Benson, 59pp (PDF) (web)
***blueprints - more ordnance prints, 18pp (PDF) (web)
Tuning and Gunsmithing
Barrel
***fitting a new barrel (forum.m1911.org)
***barrel hood fitting question (homegunsmith.com)
***hoodface to breechface - contact when fitting barrel? (homegunsmith.com)
***1911 - why drop-in barrels make sense (Weapons Guild)
***excessive headspace (homegunsmith.com)
***headspace (thehighroad.org)
***barrel fitting (forum.1911.org)
***barrel play in battery and vertical stringing (forum.m1911.org)
***too much barrel wear? (forum.m1911.org)
***measuring barrel locking lug engagement (thehighroad.org)
***barrel lockup (thehighroad.org)
***headspace (thehighroad.org)
***checking headspace (thehighroad.org)
***barrel hood fit (thehighroad.org)
***peened locking lugs - 1911 (thehighroad.org)
***barrel lockup on 1911 (thehighroad.org)
***minimum safe locking surface engagement (thehighroad.org)
***barrel fitting (thehighroad.org)
***barrel fitting and headspace (thehighroad.org)
***barrel lug engagement (thehighroad.org)
***Norinco barrel too soft (thehighroad.org)
***fitting Kart barrel (thehighroad.org)
***drop-in barrel fitting (thehighroad.org)
***barrel/slide on SA 1911 (thehighroad.org)
***uniform lug engagement (thehighroad.org)
***barrel/slide lug engagement (thehighroad.org)
***Barrel position to feed ramp question (thehighroad.org)
***old Colt/Kart barrel project (thehighroad.org)
***fitting 1911 barrel (thehighroad.org)
***bad Norinco barrel (thehighroad.org)
***killed barrel: a timing study (thehighroad.org)
***1911 45 barrel construction? (thehighroad.org)
***how to check 1911 for lug engagement? (thehighroad.org)
***barrel fitting (blindhogg.com)
***1911 barrel variations (coolgunsite.com)
***Series 80 barrel fit (forum.m1911.org)
***barrel hood movement at lockup (forum.m1911.org)
***trouble fitting Kart EZ-Fit barrel (forum.m1911.org)
***cutting barrel flush with bushing (forum.m1911.org)
***barrel to slide lug contact observation (forum.m1911.org)
***Nowlin pre fit barrel question? (forum.m1911.org)
***Picture of throated 9mm barrel (forum.m1911.org)
***Colt Gov't vertical lock-up problem (forum.m1911.org)
***what causes this wear pattern and should I be concerned? (forum.m1911.org)
***weld lower lugs (1911addicts.com)
***barrel fitting (forum.m1911.org)
***lug wear (forum.m1911.org)
***fitting a barrel hood (forum.m1911.org)
***minimum barrel hood width? (forum.m1911.org)
***new barrel (shootingtimes.com)
***barrel lower lug wear (forum.m1911.org)
***lower lug (forum.m1911.org)
***barrel "springing" (forum.m1911.org)
***barrel fitting woes... (forum.m1911.org)
***barrel chamber misunderstandings (forum.m1911.org)
***Norinco lug wear (forum.m1911.org)
***barrel knee profiles (forum.m1911.org)
***checking barrel fit (forum.m1911.org)
***increasing lug engagement? (forum.m1911.org)
***two piece barrels (forum.m1911.org)
***barrel feet/SS pin update (forum.m1911.org)
***barrel fitting question (forum.m1911.org)
***top of barrel to inside of slide clearance (forum.m1911.org)
***barrel installation question (forum.m1911.org)
***having issues fitting my barrel (forum.m1911.org)
***question about barrel blueprints (forum.m1911.org)
***barrel ramp design? (forum.m1911.org)
***timing the barrel, link, frame, and slide (.DOC) (Schuemann Barrels)
***barrel fitting question (forum.m1911.org)
***lower lug fitting (forum.m1911.org)
***witness window in barrel hood (forum.m1911.org)
***info on barrel torque (forums.1911forum.com)
***unusual wear on barrel lugs? (forums.1911forum.com)
***barrel lug sheared off (forums.1911forum.com)
***measuring the slide hood length (forums.1911forum.com)
***barrel fitting question... (forum.m1911.org)
***barrel bed or impact surface? (forums.1911forum.com)
***slide lugs and barrel lugs question (forum.m1911.org)
***too much vertical lug engagement? (forum.m1911.org)
***barrel hood fitting blues (forum.m1911.org)
***separation of two-part barrel (forum.m1911.org)
***lugs showing wear (forum.m1911.org)
***barrel to slide measurements (forum.m1911.org)
***45deg barrel lug chamfer? (forum.m1911.org)
***Swenson "Accuracy Tuner" (forum.m1911.org)
***barrel hood to touch breechface or not? (forum.m1911.org)
***locking lug engagement (forum.m1911.org)
***under-barrel lug frame slot tightening (forum.m1911.org)
***M1911A1 breeching space (forum.m1911.org)
***barrel feet & SS pin fitting (forum.m1911.org)
***slide stop imprint on lower lugs? (forum.m1911.org)
***cutting upper lugs (forum.m1911.org)
***lower barrel lug peening against slide stop? (forum.m1911.org)
***lower barrel lugs and linkdown (forum.m1911.org)
***breech face depression problem (forum.m1911.org)
***barrel fit clinic (forum.m1911.org)
***barrel clinic-2 (forum.m1911.org)
***barrel drop clearance (forum.m1911.org)
***Jarvis Camlock System (American Handgunner)
***slide/barrel vertical stack (1911pro.com)
***BoMar barrel stabilizer (1911pro.com)
***.38 Super barrel and throat (forums.1911forum.com)
***lowering the barrel in the frame bed (forum.m1911forum.org)
***cracked barrel? (forums.1911forum.com)
***radial contact (forums.1911forum.com)
***barrel cant while fitting (forums.1911forum.com)
***.38 Super barrel diameters (forums.1911forum.com)
***slide-barrel-hood clearance - W/N ramp (forums.1911forum.com)
***cutting lower lugs with a mill (forums.1911forum.com)
***barrel lock up angle (forums.1911forum.com)
***hard fit gone wrong (forums.1911forum.com)
***barrel hood contact against breech face normal? (forums.1911forum.com)
***how to shorten a 1911 slide (forums.1911forum.com)
***cutting lower lugs (forums.1911forum.com)
--bushing--
***bushing expander (homegunsmith.com)
***barrel bushing lug question (forum.m1911.org)
***bushing clearance (homegunsmith.com)
***bushing fitting (homegunsmith.com)
***FTF after new barrel bushing (forum.m1911.org)
***bushing tightness (thehighroad.org)
***custom barrel bushing (thehighroad.org)
***loose barrel bushing durability? (thehighroad.org)
***how tight is the bushing on a 1911 supposed to be? (thehighroad.org)
***collet bushing (thehighroad.org)
***1911 barrel bushing (thehighroad.org)
***Briley barrel bushing (thehighroad.org)
***Norinco barrel bushing replacement (thehighroad.org)
***need help fitting a 1911 bushing (thehighroad.org)
***Sistema 1911 barrel bushing question (thehighroad.org)
***Gov't Model barrel bushing tightness (thehighroad.org)
***fitting 1911 barrel bushing (thehighroad.org)
***fitting Norinco 1911 barrel bushing (thehighroad.org)
***1911 barrel bushing (thehighroad.org)
***barrel bushing question (thehighroad.org)
***tricks to removing tight fitting barrel bushing? (thehighroad.org)
***need 1911 bushing help (thehighroad.org)
***Briley spherical bushing (thehighroad.org)
***collet bushing question (thehighroad.org)
***match grade bushing (forum.m1911.org)
***Colt Series 70 collet bushing question (forum.m1911.org)
***bushing wrenches and barrel bushings (forum.m1911.org)
***Series 70 collet bushing question (forum.m1911.org)
***cracked barrel bushing (thefiringline.com)
***angle bored bushing (forum.m1911.org)
***bushing expander (forum.m1911.org)
***GI vs. Commander bushing (forum.m1911.org)
***Briley bushing (forum.m1911.org)
***loose barrel bushing fix (forum.m1911.org)
***O-ring for bushing fit (forum.m1911.org)
***peening the bushing tab? (forum.m1911.org)
***bushing install: turning the OD (forum.m1911.org)
***barrel bushing - where is the stress (forum.m1911.org)
***bushing notch in slide oversize? (forum.m1911.org)
--compensators--
***adding a [1911] compensator (thehighroad.org)
***getting the most out of your compensator (brazoscustom.com)
--ramped barrels--
***identify your barrel ramp (.DOC) (Schuemann Barrels)
***ramped and unramped barrels (.DOC) (Schuemann Barrels)
***installing ramped barrel (homegunsmith.com)
***ramp types (homegunsmith.com)
***ramped barrel (homegunsmith.com)
--frame ramp--
***barrel fit at ramp (forum.m1911.org)
***frame ramp to barrel ramp (forum.m1911.org)
***ramp job won't feed any more (thehighroad.org)
***1911 feed ramp polishing (thefiringline.com)
***dimple cut throat from Colt Custom Shop on older Colt 1911 (forum.m1911.org)
***replace damaged feed ramp (forum.m1911.org)
***aluminum 1911, steel ramp replacement? (thefiringline.com)
***ramp angle and depth, how to measure? (forum.m1911.org)
***should you polish the feed ramp? (forum.m1911.org)
***ramp angle (forum.m1911.org)
***bullet travel up ramp (forum.m1911.org)
***barrel ramp overhanging the feed ramp? (forum.m1911.org)
***feed ramp adjustment question (forum.m1911.org)
***barrel ramp types for Gov't pistols (forum.m1911.org)
***feed ramp peening - aluminum frame (forum.m1911.org)
***frame feed ramp depth (forum.m1911.org)
***receiver feed ramp length (forum.m1911.org)
***magazine well and feed ramp angles (forum.m1911.org)
***insufficient frame/barrel ramp gap (forum.m1911.org)
***frame ramp angle (1911pro.com)
***feed ramp angle (forum.m1911.org)
***feed ramp depth (forum.m1911.org)
Slide
--fitting--
***slide not aligned with the rear of the frame (forum.m1911.org)
***slide/frame misalignment at rear (homegunsmith.com)
***slide forward of frame (forum.1911forum.com)
***what stops slide when it goes into battery? (forum.m1911.org)
***fitting a slide to a frame (homegunsmith.com)
***slide won't lock (homegunsmith.com)
***how much play is OK? slide-frame fit (homegunsmith.com)
***slide won't close on last round (homegunsmith.com)
***slide won't close all the way (homegunsmith.com)
***old school slide fitting? (homegunsmith.com)
***slide does not line up (homegunsmith.com)
***new barrel won't go into battery (homegunsmith.com)
***slide gets stuck back (homegunsmith.com)
***slide fitting information? (homegunsmith.com)
***slide loose on rails (homegunsmith.com)
***sticky slide (forum.m1911.org)
***loose frame to slide fit (forum.m1911.org)
***lap or file slide to frame? (thehighroad.org)
***cracked slide (thehighroad.org)
***French cut (blindhogg.com)
***1911 slide hangs up (gunrightsmedia.com)
***rough breechface (forum.m1911.org)
***barrel rifling and slide torque (forum.m1911.org)
***barrel rifling and slide torque (more) (forum.m1911.org)
***breech face differences (forum.m1911.org)
***soft Llama slides (Weapons Guild)
***slides with oversized rails? (forum.m1911.org)
***mystery slide drag (forum.m1911.org)
***slide cracks (forum.m1911.org)
***slide lug appearance (forum.m1911.org)
***stampings on disconnector rail (forum.m1911.org)
***depth of slide locking lugs (forum.m1911.org)
***slide wear from hammer? (forum.m1911.org)
***slide drawing (forum.m1911.org)
***Commander slide on a GI frame (forum.m1911.org)
***takedown notch position (forum.m1911.org)
***bushing recess in end of slide is out of round (forum.m1911.org)
***National Match slide lug dimensions (forum.m1911.org)
***slide to frame fit (go2gbo.com)
***tighten stainless slide? (forum.m1911.org)
***angled breechface: part deux (forum.m1911.org)
***polishing breechface (forum.m1911.org)
***bevel on lower breechface (forum.m1911.org)
***frame to slide clearance (forum.m1911.org)
***slide to frame lateral clearance (forum.m1911.org)
***slide and frame fitting (1911pro.com)
--modification--
***slide serration cutter (homegunsmith.com)
***cutting top strap serrations (blindhogg.com)
***front cocking serrations 1 (blindhogg.com)
***front cocking serrations 2 (blindhogg.com)
***serrating top of slide (1911pro.com)
***ball mill / Hi Power cut (forums.1911forum.com)
--porting--
***porting barrel and slide (blindhogg.com)
***lowering the ejection port (garagegunsmith)
***lowered ejection port measurements? (garagegunsmith)
***ejection port tuning (homegunsmith.com)
***cutting a 1911 port (Weapons Guild)
***ejection port angle on 1911 slide (thehighroad.org)
***porting (blindhogg.com)
***why the flare on a lowered port? (forum.1911.org)
***ejection port questions (forum.1911.org)
--slide stop / slide release--
***stiff slide stop (homegunsmith.com)
***1911 stiff slide release (thehighroad.org)
***ambidextrous 1911 slide release (thehighroad.org)
***broken slide stop (thehighroad.org)
***Springfield 1911 broken slide stop question (thehighroad.org)
***repair slide stop notch (homegunsmith.com)
***slide stop walking out of frame (thehighroad.org)
***1911 slide stop doesn't drop (thehighroad.org)
***1911 slide stop operation question (thehighroad.org)
***1911 slide stop pin/link hole question (thehighroad.org)
***9mm magazine and slide stop (thehighroad.org)
***slide stop slides out (thehighroad.org)
***slide stop fails to operate (thehighroad.org)
***broken 1911 slide release (thehighroad.org)
***1911 slide stop drops too easily (thehighroad.org)
***.38 Super vs. .45 slide stop difference (thehighroad.org)
***countersunk slide stop hole (gunrightsmedia.com)
***1911 slide stop retention (gunrightsmedia.com)
***should slide stop be loose when gun in battery? (forum.m1911.org)
***slide stop tried to depart gun (forum.m1911.org)
***installing slide stop (forum.m1911.org)
***Help with fitting slide stop (forum.m1911.org)
***slide jamming due to slide catch? (forum.m1911.org)
***assembling slide stop and link (thefiringline.com)
***MIM slide stop durability (forum.m1911.org)
***slide stop interchange (forum.m1911.org)
***recessed slide stop (forum.m1911.org)
***.45 slide stop in 9mm 1911 (forums.1911forum.com)
Magazine
***magazine function: the dimple (forum.m1911.org)
***last round problem (homegunsmith.com)
***1911 not chambering top round (forum.m1911.org)
***feeding oddity (thehighroad.org)
***1911 magazine timing (thehighroad.org)
***magazine stuck in 1911 (thehighroad.org)
***another 1911 9mm nosedive (thehighroad.org)
***1911 9mm ammo nosedive (thehighroad.org)
***sear spring interfering with mag dropping free - 1911 (thehighroad.org)
***ramp, magazine, throat, feed (thehighroad.org)
***.40 Colt magazine feed problem (thehighroad.org)
***1911 mag problem? (thehighroad.org)
***magazine observations (thehighroad.org)
***magazine problems 1911A1 (thehighroad.org)
***1911 slide falls when magazine inserted (thehighroad.org)
***making 8-round magazines run in a 1911a1 (thehighroad.org)
***magazine problem (thehighroad.org)
***1911 magazines (thehighroad.org)
***dimpled follower question (thehighroad.org)
***DEVEL magazine information and ejector modification (thehighroad.org)
***DEVEL type followers (thehighroad.org)
***a magazine malfunction (revisited) (thehighroad.org)
***Shooting Star followers (thehighroad.org)
***jammed magazine (thehighroad.org)
***how do you take apart a 1911 magazine? (thehighroad.org)
***follower overrides slide stop (thehighroad.org)
***feed problem (forum.m1911.org)
***SI double stack magazine tweaks (brianenos.com)
--magazine release--
***left hand mag release? (homegunsmith.com)
***left hand mag releases (brianenos.com)
***catch not flush with right side of frame (forums.1911forum.com)
***lighter catch spring (forums.1911forum.com)
***magazine catch spring (forum.m1911.org)
***how to remove the mag release (thefiringline.com)
***mag catch won't catch (homegunsmith.com)
***fixing oversized mag release hole (homegunsmith.com)
***magazine catch loose (homegunsmith.com)
***fitting a magazine catch (forum.m1911.org)
***magazine spring tension (forum.m1911.org)
***how to replace magazine catch? (forum.m1911.org)
***extended mag release paddle button - STI (forums.1911forum.com)
***hex head mag catch lock (forums.1911forum.com)
***adjusting magazine catch (forums.1911forum.com)
***elevated magazine catch? (forums.1911forum.com)
Trigger
***Building a Low Buck Shooter - Part II - A Trigger Job (www.realguns.com)
***1911 Trigger Job Clinic Part 4: The Trigger (thehighroad.org)
***trigger job question (forum.m1911.org)
***1911 - trigger jobs and sear feet (Weapons Guild)
***trigger job (blindhogg.com)
***trigger wobble (homegunsmith.com)
***trigger too loose (homegunsmith.com)
***trigger take-up (homegunsmith.com)
***no trigger overtravel (homegunsmith.com)
***trigger take-up (homegunsmith.com)
***need help with trigger assembly (homegunsmith.com)
***trigger creep - what causes it? (homegunsmith.com)
***installing a trigger overtravel screw (homegunsmith.com)
***1911 trigger problems (gunco.net)
***hammer follow when firing (forum.m1911.org)
***trigger slack (forum.m1911.org)
***1911 overtravel screw removal, what can happen? (thehighroad.org)
***increasing trigger pull on 1911? (thehighroad.org)
***lowest safe trigger pull for 1911? (thehighroad.org)
***1911 w/insufficient firing pin fall (thehighroad.org)
***1911 trigger problem (thehighroad.org)
***flat faced 1911 trigger (thehighroad.org)
***stiff trigger pull (thehighroad.org)
***1911 Trigger Question (thehighroad.org)
***1911 Trigger Problem (thehighroad.org)
Hammer
***hammer won't re-cock after firing? (homegunsmith.com)
***hammer won't lock back consistently (homegunsmith.com)
***sear won't engage hammer (homegunsmith.com)
***hammer/sear orientation during reassembly (forum.m1911.org)
***Hammer stuck after reassembly (forum.m1911.org)
***hammer hook question (forum.m1911.org)
***hammer follows slide (thehighroad.org)
***1911 hammer hooks (thehighroad.org)
***1911 Trigger Job Clinic Part 1: The Hammer (thehighroad.org)
***1911 hammer follow question (thehighroad.org)
***Series 80 hammer and sear in GI? (thehighroad.org)
***effect of dropping a used hammer in a 1911 (thehighroad.org)
***light hammer strike in a 1911 (thehighroad.org)
***1911 hammer hook question (thehighroad.org)
***1911 hammer spur. No purpose? (thehighroad.org)
***cocked hammer/slide clearance? (thehighroad.org)
***Hammer hooks... how low can you go? (thehighroad.org)
***hammer boosting caveat (thehighroad.org)
***hammer not centered (thehighroad.org)
***hammer bounce (thehighroad.org)
***hammer bounce explained (thehighroad.org)
***Series 80 hammer (thehighroad.org)
***hammer design (forum.m1911.org)
--hammer pin--
***hammer and strut pin, pin seems wide (homegunsmith.com)
***tip for putting hammer pin back in (thehighroad.org)
--hammer strut--
***hammer strut pin installation (forum.m1911.org)
***how to stake the hammer strut pin (thehighroad.org)
***staking a hammer strut pin (thehighroad.org)
***accuracy issues after replacing hammer strut (forum.m1911.org)
***potbelly vs. parallel hammer strut (forums.1911forum.com)
***hammer strut (thehighroad.org)
Extractor
***extractor failures (homegunsmith.com)
***extractor tuning tips (forum.m1911.org)
***extractor too long (homegunsmith.com)
***extractor question (homegunsmith.com)
***fails to extract (forum.m1911.org)
***tune a 70 Series extractor (forum.m1911.org)
***loose Kimber extractor (forum.m1911.org)
***two-piece extractor (forum.m1911.org)
***extractor problem or just needs to be broken in? (forum.m1911.org)
***.38/9mm extractor (forum.m1911.org)
***extraction help please! (thehighroad.org)
***1911 extractor breaking (thehighroad.org)
***9mm extractor question (thehighroad.org)
***1911A1 extractor (thehighroad.org)
***1911 Series 70 extractor removal (thehighroad.org)
***proper extractor tensioning? (rec.guns)
***1911 9mm extraction problems (thehighroad.org)
***extractor marks brass (thehighroad.org)
***extractor breakage (thehighroad.org)
***question about dents in .45 ACP brass (1911) (thehighroad.org)
***spring steel extractors (thehighroad.org)
***removing extractor (thehighroad.org)
***1911 Auto extractor adjustment (brownells.com)
***Dave Lauck Tanto extractor (dlsports.com)
***1911 extractor removal? (gunatics.com)
***Reliability: Extractors and Ejectors (thehighroad.org)
***Reliability Tweaks 4: Extractors! (thehighroad.org)
***Browning's Mistakes (American Handgunner)
***extractors (thehighroad.org)
***.40 and 10mm extractors (thehighroad.org)
***1911 failure to eject (thehighroad.org)
***extractor problem (thehighroad.org)
***extractor specs for the 1911 platform (thehighroad.org)
***failure to eject - jammed (thehighroad.org)
***1911 case thrown back into feed lips (thehighroad.org)
***extractor mod for mis-cut breech face (thehighroad.org)
***ejection puzzle - 1911 Officers (thehighroad.org)
--external extractors--
***external extractor pros/cons? (homegunsmith.com)
***external extractor tension check (forum.m1911.org)
***Kimber 1911s - internal or external extractor? (thehighroad.org)
***external extractor on S&W 1911s? (smith-wessonforum.com)
***internal extractor vs. external (perfectunion.com)
***external extractors and 1911s (10-8performance.blogspot.com)
Ejector
***installing a new ejector (homegunsmith.com)
***ejector pin, where is it and what does it do? (homegunsmith.com)
***ejector frame holes (homegunsmith.com)
***ejector fitting (homegunsmith.com)
***slide doesn't fit ejector (homegunsmith.com)
***question about ejector (homegunsmith.com)
***.38 Super / 9mm ejectors (forum.m1911.org)
***loose ejector ok? (forum.m1911.org)
***how to fix a loose 1911 ejector (thehighroad.org)
***broken mounting pins on 1911 ejector (thehighroad.org)
***broken ejector stud removal (thehighroad.org)
***Colt Commander rear ejector leg broken (thehighroad.org)
***ejector tuning (thehighroad.org)
***1911 ejects all over the place (thehighroad.org)
***1911 ejector tuning (thehighroad.org)
***ejector (blindhogg.com)
***removing sheared 1911 ejector leg? (thefiringline.com)
***ejection problem (thefiringline.com)
***just figured out a better ejector hole cutting method! (forum.m1911.org)
***loose ejector (forum.m1911.org)
***.38 Super ejection issue (forum.m1911.org)
***GI vs. long vs. extra long ejector (forum.m1911.org)
***staking ejector... (forum.m1911.org)
Disconnector
***disconnector fitting (homegunsmith.com)
***1911 - Disconnector Function and Modification Boo Boos (Weapons Guild)
***disconnector height (homegunsmith.com)
***how high should the disconnector be? (homegunsmith.com)
***sear/disconnector contact area (homegunsmith.com)
***disconnector dilemma (homegunsmith.com)
***extra-long disconnector? (homegunsmith.com)
***1911 Trigger Job Clinic Part 3: Disconnector (thehighroad.org)
***1911 disconnector problem (thehighroad.org)
***disconnector problem (thehighroad.org)
***a disconnector story (thehighroad.org)
***disconnector operation (thehighroad.org)
***EDW long ball disconnect/hard sear (forum.m1911.org)
***slide hanging on disconnector (forum.m1911.org)
***Chip McCormick High Tech disconnector (forum.m1911.org)
***disconnector problems (forum.m1911.org)
***disconnector spotty (forum.m1911.org)
***disconnector is sticky (forum.m1911.org)
***disconnector length (forum.m1911.org)
***function of the disconnector (forum.m1911.org)
***disconnector prep (forums.1911forum.com)
***Marvel disconnector anti-stall cut (forums.1911forum.com)
Sear
--sear--
***sear modification to prevent interference with the disconnector (forum.m1911.org)
***sear installation problem, sear too wide? (homegunsmith.com)
***sear pin loose (homegunsmith.com)
***hammer/sear issue (homegunsmith.com)
***sear doesn't catch all the time (homegunsmith.com)
***hammer half cocking (homegunsmith.com)
***sear problem (homegunsmith.com)
***help with sear assembly? (homegunsmith.com)
***beaten up sear (forum.m1911.org)
***1911 trigger job clinic part 2 SEAR (thehighroad.org)
***hammer and sear angles (thehighroad.org)
***1911 sear specs = clearance angle? (thehighroad.org)
***New Gold Cup sear doesn't have a spring hole? (forum.m1911.org)
***Gold Cup sears (forum.m1911.org)
***sear face on hooks or hooks on sear face? (forum.m1911.org)
***does this sear look right to you? (forum.m1911.org)
***sear angle (forum.m1911.org)
--sear spring--
***1911 sear spring? (thehighroad.org)
***sear spring problems (forum.m1911.org)
***sear spring tab (forum.m1911.org)
***sear spring tension (forum.m1911.org)
Link
***link fitting (forum.m1911.org)
***rely on link to stop rearward motion? (homegunsmith.com)
***how to stake the link pin (forum.m1911.org)
***barrel pin falling out in GI 1911/A> (thehighroad.org)
***stopping barrel fall at linkdown (forum.m1911.org)
***link pin fit (forum.m1911.org)
***timing and clearances with a bull barrel (homegunsmith.com)
***changing barrel link (forum.m1911.org)
***barrel link problem? (forum.m1911.org)
***barrel link sizes and their use (forum.m1911.org)
***wobbly barrel link (forum.m1911.org)
***does barrel link have to be peened? (forum.m1911.org)
Safety
--operation--
***how 1911 safeties work (thehighroad.org)
***1911 safety in operation (forum.m1911.org)
--thumb safety--
***fitting a thumb safety, steps involved (forum.m1911.org)
***half cock/safety stop interference (homegunsmith.com)
***thumb safety problem (homegunsmith.com)
***sticking safety (forum.m1911.org)
***stiff thumb safety? (forum.m1911.org)
--grip safety--
***fitting a beavertail (homegunsmith.com)
***history of the beavertail (forums.1911forum.com)
***1911 - Drop-in Grip Safety Installation (Weapons Guild)
***grip safety (homegunsmith.com)
***grip safety and jig (homegunsmith.com)
***grip safety doesn't work after detail strip (forum.m1911.org)
***fitting grip safety (thehighroad.org)
***grip safety problem (thehighroad.org)
***1911 grip safety question (thehighroad.org)
***de-activating the grip safety in a 1911 (thefiringline.com)
***GI or beavertail safety? (hipowersandhandguns)
***looking for a beavertail safety without a hammer slot (forums.1911forum.com)
--ambidextrous thumb safeties--
***installing ambi thumb safety (homegunsmith.com)
***1911 ambi thumb safety rundown (thehighroad.org)
--Swartz/Series 80 safety--
***Kimber with Swartz safety (thehighroad.org)
Recoil Spring
--recoil plug--
***is this the cut I need to make for a reverse plug? (homegunsmith.com)
***how to fit a reverse plug? (homegunsmith.com)
***1911 recoil plug wear (thefiringline.com)
***recoil spring plug question (forum.m1911.org)
***recoil spring plug peening barrel feet (forum.m1911.org)
--guide rod--
***guide rod - short or full length? (forum.m1911.org)
***converting a guide rod (forum.m1911.org)
***recoil spring guide rod (forum.m1911.org)
***1911 full length guide rods? (thehighroad.org)
***doing away with FLGR on 1911 (thehighroad.org)
--spring--
***how to test if your recoil spring is binding (forum.m1911.org)
***how do you check the spring? (homegunsmith.com)
***let's talk a little more about springs (thehighroad.org)
***recoil spring study (thehighroad.org)
***Colt Delta Elite recoil system (thehighroad.org)
***lightest recoil spring? (homegunsmith.com)
***recoil spring for light loads (thehighroad.org)
***how should one fit a recoil spring in a 1911? (thehighroad.org)
***Cutting recoil springs (thehighroad.org)
***spring weights (forum.m1911.org)
***1911 recoil spring question (thehighroad.org)
***variable power recoil springs (thehighroad.org)
***1911 springs experience (thehighroad.org)
***recoil spring (thehighroad.org)
***question about recoil springs (thehighroad.org)
***spring rates (thehighroad.org)
***Recoil Springs 2: The Free Lunch (thehighroad.org)
***spring forth! (thehighroad.org)
***recoil spring selection tips (Wilson catalog) (sightm1911.com)
***spring stacking (forum.m1911.org)
--buffer--
***recoil buffer tech question (thehighroad.org)
***buffer prevent cracked frame? (thehighroad.org)
Sights
***front sight cuts dimensions (forum.m1911.org)
***cutting dovetails for sights (homegunsmith.com)
***Kimber 1911 sight cut dimensions? (homegunsmith.com)
***1911, how do you remove front sight roll pin? (forum.m1911.org)
***sights, sights, and more sights (1911addicts.com)
Plunger Assembly
--tube--
***1911 plunger tube (homegunsmith.com)
***countersinking the plunger tube? (homegunsmith.com)
***1911 plunger tube - making it stay (homegunsmith.com)
***1911; to Loctite, or not to Loctite... (thehighroad.org)
***plunger tube (thehighroad.org)
***restaking plunger tube (thehighroad.org)
***plunger tube (blindhogg.com)
***1911 plunger tube (gunrightsmedia.com)
***removing plunger tube (forum.m1911.org)
***yet another loose plunger tube question (forum.m1911.org)
Mainspring Housing
***breaking mainspring housing pin? (homegunsmith.com)
***fitting new mainspring housing (homegunsmith.com)
***adjustable mainspring housing (surplusrifleforum)
***rounded mainspring housing (forum.m1911.org)
***main spring housing pin breaks (forum.m1911.org)
***Kimber Series II main spring housing (thehighroad.org)
***how to assemble a 1911 mainspring housing? (thehighroad.org)
Frame
***frame nomenclature (forum.m1911.org)
***Caspian titanium 1911 frames (thehighroad.org)
***slide stop holes wrong (homegunsmith.com)
***slide stop pin diameter? (thehighroad.org)
***Series 80 frame blank warning (thehighroad.org)
***Ed Brown type bobtail modification (homegunsmith.com)
***cutting front strap serrations (homegunsmith.com)
***slide stop issues (forum.m1911.org)
***peening/battering - pics (forum.m1911.org)
***plastic frames (thefirearmsforum.com)
***lug engagement (forums.1911forum.com)
***welding frame and barrel (forums.1911forum.com)
***sear pin holes in frame not square (forums.1911forum.com)
***how to move the abutment surface back? (forum.m1911forum.org)
***lowering frame bridge (forum.m1911forum.org)
--Frame VIS--
***peening of VIS (forum.m1911.org)
***what is VIS in a 1911 (thehighroad.org)
***In search of VIS impact... (forum.m1911.org)
***optimal VIS impact... (forum.m1911.org)
***VIS surface (forums.1911forum.com)
***VIS contact and bed contact (forum.m1911.org)
--grip screws and bushings--
-bushings-
***grip bushing thread? (homegunsmith.com)
***stripped grip bushing threads (forum.m1911.org)
***bushing unscrewed with grip screw (thehighroad.org)
***oversized screw bushings? (thehighroad.org)
--dust cover--
***dust cover fit (forum.m1911.org)
***dust cover tolerance (thehighroad.org)
***off-center dust covers (forums.1911forum.com)
--cracks--
***1911 dust cover crack (thehighroad.org)
***cracked frame - opinions needed (thehighroad.org)
--rails--
***tightening frame rails (homegunsmith.com)
***soldering or brazing slide rails (homegunsmith.com)
***welding slide rails (forum.m1911.org)
***how long do peened frame rails hold up? (forum.m1911.org)
***frame rail damage (forum.m1911.org)
***rail repair jig (thehighroad.org)
***Acc-U-Rails (web site)
***Accu-Rail System? (forums.1911forum.com)
--ramp--
***feed ramp fix (homegunsmith.com)
***1911 feed ramps (thehighroad.org)
***ramp and throat job (thehighroad.org)
***ramp repair insert (thehighroad.org)
***alloy frame repair (thehighroad.org)
***cutting frame for ramped barrel (thehighroad.org)
***frame rail repair inserts (1911pro.com)
Firing Pin
--pin--
***firing pin won't fit (homegunsmith.com)
***odd firing pin sizes (forum.m1911.org)
***1911 off center strikes (thehighroad.org)
***firing pin lengths (forum.m1911.org)
***1911 firing pin sticking forward (thehighroad.org)
***firing pin removal question (forum.m1911.org)
***Springfield firing pins (thehighroad.org)
***stuck firing pin in Sistema (thehighroad.org)
***firing pin measurements (forum.m1911.org)
--firing pin spring--
***stiffer firing pin springs better? (thehighroad.org)
***extra power firing pin springs... (forums.1911forum.com)
--firing pin stop--
***firing pin stop and assembly problems (homegunsmith.com)
***function of firing pin stop (thehighroad.org)
***firing pin stop off center? (thehighroad.org)
***fitting firing pin stop (forum.m1911.org)
***firing pin block maybe doesn't? (forum.m1911.org)
***firing pin stop is loose (forum.m1911.org)
***firing pin stop fitting (forum.m1911.org)
***tight firing pin stop (forum.m1911.org)
***tip for fitting an FPS (forums.1911forum.com)
***firing pin stop shape (thehighroad.org)
***firing pin stop question (thehighroad.org)
Tools
***1911 tools (forum.1911.org)
***recoil spring measuring tools (forum.1911.org)
***oddball dovetail cutters (thehighroad.org)
***1911 tuning tools (thehighroad.org)
***use of 1911 trigger stirrup die (thehighroad.org)
***slide lug location measurement tool idea (sightm1911.com)
***1911 Tools (blindhogg.com)
***frame support tool (forum.m1911.org)
***frame fixtures (forums.1911forum.com)
***universal sight mover (web)
--sear jigs--
***sear jig, which is best? (homegunsmith.com)
***which sear jig to get? (forum.1911.org)
***Favorite 1911 Sear Jig? (thehighroad.org)
***Marvel sear jig (forum.m1911.org)
***TR sear jig (1911pro.com)
***Bengtson Sear Jig (sightm1911.com)
Function and Troubleshooting
--inspection--
***1911 inspection checklist (forum.m1911.org)
***Safety Tests for the M1911/M1911A1 Pistol (sightm1911.com)
***inspecting a 1911 after overcharge (homegunsmith.com)
--troubleshooting--
***troubleshooting chart (sightm1911.com)
--FTF/FTE--
***stovepiping (homegunsmith.com)
***Live Ammo Double Feed (forum.m1911.org)
***failure to feed (forum.m1911.org)
***failure to feed (forum.m1911.org)
***bullet setback (forum.m1911.org)
***nose dive into ramp, subsequent refusal to chamber (forum.m1911.org)
***nosediving first round (forum.m1911.org)
***deformed brass (homegunsmith.com)
***crushed 1911 case mouths (thehighroad.org)
***extra primer dimple (go2gbo.com)
***brass brutality! (thehighroad.org)
***D-shaped brass? (forums.1911forum.com)
***odd jam (forum.m1911.org)
***failure to feed (homegunsmith.com)
***1911 not going into battery (thehighroad.org)
***doesn't always go into battery (thehighroad.org)
***1911 Jamming (homegunsmith.com)
***extraction problem (homegunsmith.com)
***what is causing firing pin drag mark? (forum.m1911.org)
***stem bind (forum.m1911.org)
--slide--
***premature unlocking of short slide ACPs (thehighroad.org)
***slide is locked when trigger is held back (homegunsmith.com)
***the hammer follows to half-cock when I release the slide (forum.m1911.org)
***slide and guide rod carnage (forum.m1911.org)
***slide doesn't always lock back (forum.m1911.org)
***slide locks back with rounds in magazine (forum.m1911.org)
***premature slide lock (thehighroad.org)
***help with 1911 slide lock (thehighroad.org)
***1911 slide lock questions (thehighroad.org)
***slide to frame impact (forum.m1911.org)
***intermittent slide lock problem (forum.m1911.org)
***catastrophic slide lock (forum.m1911.org)
***slide stop stuck (forum.m1911.org)
***9mm slide lock problem (forum.m1911.org)
***slide stop function question (forum.m1911.org)
***slide release question (forum.m1911.org)
--misc--
***trigger will not release hammer (homegunsmith.com)
***1911 Reliability Secrets (The Sight)
***pressing down on barrel hood tells you... (forum.m1911.org)
Miscellaneous
***US Army Marksmanship Training Unit build procedure (sightm1911.com)
***the MKIV/Series 70 Colts (sightm1911.com)
***The "National Match" M1911 Pistols (sightm1911.com)
***9mm slide on .45 frame? (forum.m1911.org)
***Dropping the slide on an empty chamber (1911) (thehighroad.org)
***1911 Quick-Fixes (1911tuner) (thehighroad.org)
***The Clinic: Accuracy (thehighroad.org)
***Reliability Tweaks 1: Make it Smooth (thehighroad.org)
***Reliability Tweaks 2 (thehighroad.org)
***Feed Reliability 3: The Throat Job (thehighroad.org)
***Feed Reliability: Part 2 (thehighroad.org)
***Feed Reliability: Part 1 (thehighroad.org)
***Reliability 3: Theory (thehighroad.org)
***Norinco tuning (thehighroad.org)
***fitting sequence - 1911 build (forum.m1911.org)
***"Group Gripper" (thefirearmsforum.com)
***Group Gripper concept? (forum.m1911.org)
Machining Receiver Castings
--detail machining--
***cutting the barrel bedding area (homegunsmith.com)
***disconnector hole in top of frame, what angle? (homegunsmith.com)
***cutting barrel groove seat recess (homegunsmith.com)
***frame ordnance drawing: 6 +/- 1 degrees? (forum.m1911.org)
***cam linkage slot depth (homegunsmith.com)
***pin hole countersink angles (homegunsmith.com)
***cutting mainspring housing channel (homegunsmith.com)
***hole locations and repair (homegunsmith.com)
***mainspring hole location on receiver (homegunsmith.com)
***mainspring housing pin won't go in (homegunsmith.com)
***how to cut slide rails (homegunsmith.com)
***upper rail height (homegunsmith.com)
***suggestions for 1911 frame rail cutting (thefiringline.com)
***machining disconnector counterbore (homegunsmith.com)
***disconnector hole counterbore? (homegunsmith.com)
***disconnector hole location on frame (homegunsmith.com)
***Dremel router table for 1911 slide rails (homegunsmith.com)
***OSI Rail Cutting Jig (savvysurvivor.com)
***1911 barrel sear cut, I need it explained (homegunsmith.com)
***1911 rail cutting process (homegunsmith.com)
***drilling the mag release hole (homegunsmith.com)
***filing 80% magwell (homegunsmith.com)
***barrel seat cut (homegunsmith.com)
***cutting the hammer slot (homegunsmith.com)
***cutting trigger slot (homegunsmith.com)
***OSU frame finishing jig (homegunsmith.com)
***help locating magwell (forum.m1911.org)
***cutting for thumb safety on a 75% frame (homegunsmith.com)
--full build threads--
***starting my 40% stainless steel 1911 receiver (homegunsmith.com)
***1911 build using Sarco frame casting (Weaponeer)
***sfoo 30% 1911 build (homegunsmith.com)
***1911 build (Weapons Guild)
***Sarco decorator build (homegunsmith.com)
***0% cast frame (homegunsmith.com)
***0% castings (homegunsmith.com)
***Raven's 40% build (homegunsmith.com)
***building your own 80% casting (homegunsmith.com)
***smsdba 80% build (homegunsmith.com)
Machining From Billets
***my mini-mill built Colt 1911 .45 clones (CNCZone)
***1216hrl's 3-piece welded frame (homegunsmith.com)
***CNC machined 1911 frame from billet 3 (homegunsmith.com)
***CNC machined 1911 frame from billet 2 (homegunsmith.com)
***CNC machined 1911 frame from billet 1 (homegunsmith.com)
***same as above, web page (cncguns.com)
Slide - finishing or scratchbuilding
***slide breech face angle (homegunsmith.com)
***how to cut barrel lugs in slide? (1911pro.com)
***Infinity Interchangeable Breechface installation instructions (sviguns.com)
Small Parts - finishing or scratchbuilding
***make a billet ejector (m1911addicts.com)
Hardness and Heat Treat
***Rockwell hardness question (forum.m1911.org)
***slide hardness check (forum.m1911.org)
***heat treat of original 1911s (forum.m1911.org)
1911 Ammunition
***cut-down .308 brass for .45 ACP (rec.guns)
***cut-down .308 brass for .45 ACP (Hays) (rec.guns)
1911 Variants
***AutoMag IV, V, Hardballer exploded views (web)
***my Coonan .357 arrived (ingunowners.com)
***"The Return of the Coonan .357 Automatic" (thetruthaboutguns.com)
***Hogue Avenger (www.m1911.org)
***1911 and 2011 part compatibility (weaponeer.net)
***stamped 1911A1 (weaponeer.net)
***left handed 1911 (forums.1911forum.com)
***left-handed 1911 (thehighroad.org)
Customizing and Conversion
***snakeskinning (homegunsmith.com)
***Caravelle Arms Double Ace squeeze cocking conversion (www.m1911.org)
--D/A conversion--
***Seecamp double action conversion (www.m1911.org)
***Seecamp double action conversion - patent (USPTO)
***double action conversion? (homegunsmith.com)
***S&W double action 1911 conversion - patent (USPTO)
***Colt double action 1911 variant - patent (USPTO)
Caliber Conversions
--.22 Long Rifle--
***resurrecting a 1911 .22 conversion unit (ktgunsmith.com)
***where to get .22 magazine for 1911 conversion? (homegunsmith.com)
--7.62x25--
***Kristofer_G's Tok'11, 7.62x25mm Chamber 1911 (Weapons Guild)
***A 1911 Rarity - VC converted USGI to Tokarev (AR15.com)
--.380 ACP--
***.380 ACP conversion (forum.m1911.org)
***.38 Super to .380 ACP (forum.m1911.org)
--.38 Special--
***.38 Special (homegunsmith.com)
***1911 .38 Special (thefiringline.com)
***.38 Special 1911 Questions (targettalk.org)
***.38 Special (forum.m1911.org)
***.38 Special wadcutter for bullseye (forum.m1911.org)
--.38 Super--
***wanting to build a .38 Super (homegunsmith.com)
***.38 Super frame differences? (forum.m1911.org)
***Convert 1911 Series 70 9mm to fire .38 Super? (thehighroad.org)
***Change a Colt from .38 Super to .45ACP? (thehighroad.org)
***1911 9mm to .38 Super conversion (thehighroad.org)
***.40 to .38 Frame Compatibility (thehighroad.org)
***.45ACP to .38 Super? (thehighroad.org)
--.357 SIG--
***1911/.357 Sig Project (surplusrifleforum.com)
***converting a 1911 to .357 Sig (louderthanwords.us)
--9mm Parabellum--
***9mm 1911 feeding problems (thehighroad.org)
***9mm top end for 1911 (thehighroad.org)
***.38 Super to 9mm conversion (thehighroad.org)
***.38 Super conversion to 9mm (thehighroad.org)
***1911 9mm same as 1911 .45 frame (thehighroad.org)
***converting a .38 Super to 9mm and back (thehighroad.org)
***converting .38 Super to 9mm (thehighroad.org)
--9x23--
***a new 9x23 (homegunsmith.com)
**9x23 (thehighroad.org)
--.40 S&W--
***.40 caliber conversion (homegunsmith.com)
***1911 in .40S&W (homegunsmith.com)
***.38 Super to .40 1911 conversion? (thehighroad.org)
***.40 S&W conversion (thehighroad.org)
--10mm--
***10mm Tech Notes (web site)
***Shooting 10mm in .45ACP mags? Yes! (thehighroad.org)
***10mm in .45 frame? (forum.m1911.org)
--.41 AE--
***1911 in .41 AE? (assaultweb.net)
***.41 AE conversion kit (thehighroad.org)
--45 Super--
***.45 Super Conversion Parts (thehighroad.org)
***.40 Super and .45 Super? (forum.m1911.org)
--.460 Rowland--
***.460 Rowland conversion (thefirearmsforum.com)
***.460 Rowland technical questions (forums.1911forum.com)
***foray into .460 Rowland territory (forums.1911forum.com)
***custom .460 Rowland (forums.1911forum.com)
***.460 Rowland conversion (forums.1911forum.com)
--.50 GI--
***.50 GI pistol patent (USPTO)
***.50 GI (forum.m1911.org)
***.50 GI range report (forum.m1911.org)
--other--
***9mm Browning Long conversion (forum.m1911.org)
Finishes
***chroming (forums.1911forum.com)
***hard chrome plating (forums.1911forum.com)
Checkering, Stippling, Pocking
***checkering or serrating rear of slide (forum.m1911.org)
***home brewed machine checkering (forums.1911forum.com)
***end-of-slide treatments (forums.1911forum.com)
***non-traditional checkering (forums.1911forum.com)
1911 Builds
--build logs--
***1911 Build - Colt hard slide and Caspian receiver (Weapons Guild)
***ggruber's build notes (homegunsmith.com)
***egumpher's build notes (forum.m1911.org)
***sharps4070ss' build (forum.m1911.org)
***"The 1911 Project" (how-8I-did-it.org)
***Pistolwrench's build (homegunsmith.com)
--pictures--
***Blindhogg's Blaster build (homegunsmith.com)
***Blindhogg's "Man on Fire" build (homegunsmith.com)
***Armand Swenson 1911 (forum.m1911.org)
***Rogers "Bobnose" (forums.1911forum.com)
***"Slant Nose Recoil System" (forums.1911forum.com)