http://www.arrowmark.com.au/extractorspringtools.aspx

[clipped from tool page]

Extractor Spring Tools
Retrieved: 06/15/2014

AT07 - SMLE Extractor Spring Tool
This tool is designed to remove and insert the extractor spring on Short Magazine Lee-Enfield rifles. The end with the pin is used to remove the spring and the other end is for holding and inserting the spring into the bolthead. Fits SMLE Mk III and III*.

Price

SOLD OUT

AT08 - No4 Extractor Spring Tool
This tool is in the same basic configuration as AT07, however it is designed for use on Rifle No 4 boltheads and extractor springs. It can also be used on the Rifle No 5. Suitable for use on the following rifle models;- No 4 Mk I, Mk I*, Mk 1/2, Mk 1/3, Mk 2, L8, L42, and later 7.62mm versions. No 5 Mk I.

Price

SOLD OUT